Preparatory work that should be done before the rotary dehumidifier is operated
Time:2022/1/20 10:48:19
The rotary dehumidifier is a simple and reliable device that can dehumidify various materials. It has strong adaptability, reliable performance and large output. It is widely used in metallurgy, food, light industry, coal, medical, mining and other industries, and is well received by users. favorite. So in order to make the rotary dehumidifier safer to use, what preparations do we need to do? Next, the editor of the rotary dehumidifier will explain it, and I hope it can be helpful to everyone.
1. If the rotary dehumidifier is operated outdoors, appropriate measures must be taken to prevent rain and snow. The whole machine should be overhauled every year, and the paint should be protected every two years.
2. Maintenance of wearing parts: bearings, bearing seats, buckets and bucket screws are easy to loosen and require frequent maintenance. Conveyor bearings and connecting belt buckles should be inspected and replaced frequently, and electrical and moving parts require frequent maintenance. When maintaining the top of the tower, attention should be paid to safety.
3. Before operating the rotary dehumidifier, check whether the moving parts, conveyor belts, bearings and V-belts are damaged, and repair or replace inappropriate parts in time.
4. Lubrication and maintenance of the rotary dehumidifier: the hot air blower is lubricated every 100 hours, and the cooling fan is lubricated every 400 hours. Motors should be serviced and lubricated every 1000 hours. Crane and conveyor bearings are maintained and lubricated every shift.
5. Seasonal replacement and maintenance: The rotary dehumidifier should be maintained in each operating season. The rotary dehumidifier cleans the debris in the internal air duct, the winch loosens the wire drawing, the fan cleans the particles attached to the fan blades, the hot blast stove heat exchanger cleans the ashes in the oil pan, and the pipes are cleaned one by one. Speed Controller Motor speed controller reset to zero for backup.
The above five points are all about the preparatory work that should be done before running the rotary dehumidifier. Thank you for your understanding and support!