The dehumidification effect of the pipeline dehumidifier has a certain relationship with which factors
Time:2021/12/25 11:10:45
When the pipe dehumidifier absorbs moisture, improper operation and use can easily lead to failure. Among the common problems of pipe dehumidifiers, some are caused by operating errors and misuse, some are caused by environmental influences, and some are caused by the pipe dehumidifier itself. So what are the factors related to the dehumidification effect of the pipe dehumidifier? How to deal with if the dehumidification effect is not good? Next, let the editor of the pipe dehumidifier explain this, I hope it can be helpful to everyone.
1. Specific factors affecting the dehumidification effect of the pipeline dehumidifier:
(1) The intake filter of the duct dehumidifier is blocked and the ventilation is poor. It is difficult for humid indoor air to pass through the evaporator in large quantities, which affects the dehumidification effect of the pipe dehumidifier. At this time, the filter needs to be repaired. Check and clean, reinstall after drying.
(2) The air outlet is blocked by obstacles, causing poor air circulation and affecting the dehumidification effect. At this time, it is necessary to remove the obstruction of the air outlet of the pipe dehumidifier or change the position of the pipe dehumidifier to improve the dehumidification effect.
(3) Insufficient refrigerant in the pipeline dehumidifier, insufficient direct cooling capacity, and reduced dehumidification effect. In this case, it is necessary to add refrigerant to increase the cooling capacity of the pipeline dehumidifier.
2. Inspection method for poor dehumidification effect of pipeline dehumidifier
(1) The refrigeration system of the pipe dehumidifier is similar to other refrigeration equipment, but due to its nature, when the dehumidification effect is not good, it may not be a problem of the pipe dehumidifier itself. For example, when the room temperature exceeds 40°C, the pipe dehumidifier often starts and stops; when the pipe dehumidifier is working, the room temperature is too low, which causes the machine to freeze and defrost, and then stop working.
(2) Common dehumidification problems include low voltage, loose sockets, loose wiring, blown fuses, etc. The humidity setting of the pipe dehumidifier is incorrect, the safety device of the pipe dehumidifier is disconnected from the power supply, and the position of the water tank is incorrect. When the pipe dehumidifier freezes, the pipe dehumidifier automatically stops, and the pipe dehumidifier automatically stops. Therefore, we must conduct a comprehensive inspection of the pipe dehumidifier.
The above two points are all about the factors that affect the dehumidification effect of the pipeline dehumidifier and the inspection methods for the poor dehumidification effect. Thank you for your understanding and support!