The cooling measures of the rotary dehumidifier should be implemented from four aspects
Time:2021/9/17 11:13:49
Generally, the working environment of the rotary dehumidifier is generally poor, and it usually runs in a high temperature environment. The temperature is higher when used for a long time, so cooling is particularly important. So how to cool the rotary dehumidifier? Next, let the editor of the rotary dehumidifier explain this, I hope it can be helpful to everyone, the specific content is as follows:
1. In the long-term operation of the rotary dehumidifier, the oil tank and bearing heat up to 35℃ due to the increase in temperature, and the bearing temperature reaches 45℃ and does not exceed 45℃.
2. If the rotary dehumidifier needs to run for a long time in an emergency, it is necessary to equip the equipment with a cooling system so that the rotary dehumidifier can work normally for a long time. The rotary dehumidifier is equipped with a cooling spiral pipe, and the user can connect the cooling water by himself. When the cooling water passes through the spiral tube, the heat is transferred to the cooling water and flows out to achieve the cooling effect.
3. The flow of cooling water should not be too large, but it must be ensured that it can pass through the dehumidifier at will.
4. If the dehumidifier is not working for a long time, the rotary dehumidifier will be in danger of being frozen, so the cooling water must be discharged.
When the rotary dehumidifier is working normally, it should be checked by the staff from time to time. If the equipment is abnormal, immediately stop working to eliminate hidden dangers, extend the service life of the rotary dehumidifier, and improve its work efficiency.
The above four points are all about the cooling measures that the rotary dehumidifier should do. Thank you for your understanding and support!