Related matters that should be paid attention to during the use of industrial dehumidifiers
Time:2021/7/15 17:11:10
Industrial dehumidifiers can reduce the moisture content of laboratory air, are not easy to breed mold, and can significantly reduce the particulate matter content in the air. But it must be used correctly to make the machine work normally, achieve a good dehumidification effect, and not easily damage the machine. Next, let the editor of the industrial dehumidifier manufacturer explain it, I hope it can be helpful to everyone.
1. Pay attention to the locations of industrial dehumidifiers: First-class industrial dehumidifiers must be installed in suitable locationss and must be carefully considered. Install it in the center of the laboratory as much as possible, so that all rooms are completely enclosed. The dehumidification effect is better. Do not place other objects at the air inlet and outlet to avoid poor airflow.
2. Long-term storage: If the professional industrial dehumidifier is not used for a long time, the power plug must be unplugged. If the machine is moved to a change position, the laboratory dryer must stand for 4 to 6 hours before it can be started. Otherwise, the compressor in the industrial dehumidifier and the refrigerant in the copper tube cannot be discharged in time, which will cause adverse effects on the machine.
3. Pay attention to the working environment of the industrial dehumidifier: When dehumidifying the air, first close the doors and windows of the laboratory, and then open the industrial dehumidifier. The temperature in the laboratory should be between 5°C and 38°C. The humidity controller in the car can keep the indoor humidity within the required range. Industrial dehumidifiers should be placed vertically, inclined or horizontally, which can easily lead to damage. When moving the machine and draining water into the water tank, the power plug must be unplugged in advance.
Fourth, pay attention to the maintenance and cleaning of industrial dehumidifiers: the condenser and air filter should be cleaned regularly, about half a month or so, so that the air in and out of the air duct is unobstructed and the dehumidification effect is good. Industrial dehumidifiers. It can be cleaned with water or detergent, and the water temperature should be below 40℃. Afterwards, rinse with clean water and dry in a cool place.
The above four points are all about the matters needing attention during the use of industrial dehumidifiers. Thank you for your understanding and support!