What conditions should the constant temperature and humidity machine meet during the installation process
Time:2021/6/22 17:29:27
The constant temperature and humidity machine mainly provides test environments and test conditions such as constant humidity and constant temperature, high and low temperature complex alternation, and is used for the testing of electronic components, industrial materials, finished products and other research and development, manufacturing, and inspection links. It is suitable for industries such as electronic engineering, communication, chemical industry, hardware and rubber. So what conditions should the constant temperature and humidity machine meet in terms of installation? Next, the editor of the constant temperature and humidity machine will explain the four conditions that the constant temperature and humidity machine should meet during installation. I hope it can be helpful to everyone.
1. It is very important to maintain a compact space for cleaning and maintenance. Generally, the distance between the constant temperature and humidity machine and the wall and other obstacles should be greater than 600mm.
2. In order to prevent freezing inside the machine with constant temperature and humidity, the equipment should not be exposed to an environment with a temperature lower than the dew point of the processing air. In addition, if the equipment is installed outdoors, appropriate protective equipment must be worn. Measures should be taken to prevent the intrusion of snow, rain and frost.
3. The place where the constant temperature and humidity machine is installed must be ventilated to avoid strong electromagnetic radiation, oily smoke, sand and dust, and stay away from heat sources, corrosive gases, or places where combustibles are or may be present. The explosion hazard area created by the mixture of gas, vapor and air.
4. The outdoor unit installation site must be open to ensure good heat dissipation of the outdoor condenser. Drain pipes or condensate drain pipes should be arranged around the unit.
The above four points are all about the four conditions that the constant temperature and humidity machine should meet in terms of installation. Thank you for your understanding and support!